Réparez vos affaires Communauté Boutique

Model A1989, EMC 3358. A refresh of the existing design, with updated processor options and a change to the keyboard materials. Available in Silver and Space Gray. Released in May 2019.

133 questions Voir tout

Options

Display got red line in some cases

Hello everyone. I have a problem with the display. When I am opening and closing the top, some red blinks appear. I attach a screenshot of this

Block Image


The interesting detail is that I got repaired this Mac like a 4 days ago, the reason why I went to service center was also a problem with the display! But it was a bit different, there is also a screenshot of that

Block Image


The support told to reset Reset NVRAM or PRAM with this https://support.apple.com/en-us/HT204063 instruction. For now it’s gone, but I don’t believe that it’s gone forever

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 0
2 commentaires

Did they replace the display?

par

Yes, really. As they told me, they replaced the whole top case of it

par

Ajouter un commentaire

1 Réponse

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s
Réponse la plus utile

Options

Ouch! Your display has a crack! Looks like something heavy was dropped on the lid or something sat on the system.

Block Image

I hope you took AppleCare+ support contract as this will cost you!

Luckily its not very hard to do Remplacement de l'écran du MacBook Pro 13" Touch Bar 2017 We don’t currently have a direct guide for your exact system but this one will get you there.

Cette réponse est-elle utile ?

Oui Non
Indice 1

2 commentaires:

Thank a lot, @danj! I've already replaced that display, but that's interesting to know this fact. Could you please take a look on the first screenshot? That's the case with the new display

par

@birdi7 - The image is too blurry to see anything in your first image. How about trying again maybe you want to make a short vid. Use a tripod or other means to steady the camera/iPhone you might want to increase the light as well, just be careful the light is not reflected off the screen.

If this is a new display, then they may have damaged the ribbon cables that feed from the T-CON board to the LCD which is mounted within the uppercase.

The newer 2016 models moved it from the display assembly down to the uppercase which I think was a bad design decision. The number of lines is more and the flexing puts it at risk. We've already seen an issue with the backlight ribbon cable as well as overheating T-CON boards when people block the vents.

par

Ajouter un commentaire

Ajouter une réponse

Egor sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 2

Total : 574