Aller au contenu principal

iPhone 4 pouces commercialisé depuis mars 2016 avec une configuration de matériel similaire à l'iPhone 6s. Disponible en Argent, Gris sidéral, Or ou Or Rose, avec 16 ou 64 Gb de stockage. Modèles A1662 et A1723.

1046 questions Voir tout

Can't connect antenna cable back to logic board!

I am trying to reconnect the antenna cable to the logic board. It will not connect no matter what I do. I have tried so many times.

It is the original cable and logic board which I removed to clean after water damage.

I think I got the antenna connected a couple of times but it just pops back out. What should I do?

Block Image

Block Image

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Indice 2
Ajouter un commentaire

3 Réponses

Réponse la plus utile

Just to confirm this is the antenna connector that is located near the battery connector near the edge of the board right?

If yes, the problem might be that the gold ring or the dot in the gold ring is bent or damaged. When that happens it does not let the antenna cable plug in and will keep popping up.

The recommended way to get this fixed is to get the connector replaced on the board. If it’s the cable connector on the antenna cable itself that is damaged then either the charging port assembly needs to be replaced or another antenna cable soldered onto there.

Might want to post some photos of it here so we have a better idea of what we are looking at:

Ajout d'images à une question existante

Cette réponse est-elle utile ?

Indice 4

3 commentaires:

Thanks Ben. Yes this is the antenna connector that is located near the battery connector near the edge of the board.

I added pictures of the ring and antenna cable to my question.

Not sure what a good ring looks like but looking close up at the antenna cable — is that the issue?

Appreciate your help.

par

@Seth Kaplan I would be more concerned about the red indicator signalling liquid ingress. A dock replacement is quite inexpensive and an easy repair..if it doesn't fit, that's the first step to try in my opinion..unless you have a microscope you won't be able to really see a 0.1mm damage preventing fitting.

par

Arbaman, please add your comment as an answer ("Add Your Answer" is at the bottom scroll down) so I can give you reputation credit. I think this was the best answer. Thanks everyone for your input!

par

Ajouter un commentaire

Your antenna connector doesn’t seem to have any drastic damage, although it is a bit hard to see. These connectors typically give me a lot of grief, so my usual way of dealing with them is to carefully position the female above the male with tweezers and push down with a spudger or another pair of tweezers. You should feel a bit of a click or give. To make sure it’s properly seated, give it a bit of a nudge on the side.

Cette réponse est-elle utile ?

Indice 2
Ajouter un commentaire

Hello Seth!

As i can see your antenna cable connector has been damaged and need to be replaced.


Block Image

Cette réponse est-elle utile ?

Indice 0

3 commentaires:

Are you sure? I thought it looked damaged but then I looked at the replacement picture and it kinda looks the same?

iPhone SE (1st Gen) Logic Board Antenna Cable

par

I can’t be 100% sure, because I don’t have it on hands, but in each case when this happened, the connector was bent. Sorry the image quality isn't good, it seems that the central gold ring is damaged.

par

Can this connection be soldered?

par

Ajouter un commentaire

Ajouter une réponse

Seth Kaplan sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 7

30 derniers jours : 21

Total : 1,040