Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

How to solder a power button switch to a laptop motherboard

ok so i have a 2007 macbook motherboard im gonna use it with a portable monitor so one thing i dont have a power button and some ppl said to me to solder a switch/button on the motherboard but i dont know where to solder one but thanks i appricaite the help

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Indice 0
Ajouter un commentaire

1 solution

Réponse la plus utile

For this model I believe the power on pads (marked with a power icon) are located below the fan:

Block Image

You can just solder a basic button & two wires to those and you’re set.

Cette réponse a-t-elle été utile ?

Indice 1

Commentaires:

ok i never did this before lol so where could i get wires and what color could i use wires from a phone charger so lol im just trying to understand this correctly ok so i need wires and a button and then i need to solder the wires to the motherboard and then to the button and im all set

par

I'm just thinking you get a [button like this](https://www.amazon.com/Twidec-Normal-Mom...) and attach each wire to a pad. A bit pricey, too bad RadioShack went out of business lol — you've gotta be careful though, make sure you don't short out anything else on the board, it's small stuff you're working with.

par

@jonaharagon ok where does the red and black wire go on the pads or does it matter which side and also what side on the switch thanks

par

Ajouter un commentaire

Ajouter une réponse

Kenneth shawn sera éternellement reconnaissant.
Afficher les statistiques:

Dernières 24 heures : 0

7 derniers jours : 3

30 derniers jours : 13

Total : 297