Aller au contenu principal

4 inch display / Available in a variety of colors / Released in 3 different models / 16, 32, or 64 GB capacity

Questions au sujet de 329 Voir tout

Trouble removing charge flex cable

Hi, i’m having a difficult time removing the charge flex cable that is soldered to the board. I’ve watched several videos but always end up ripping the pads off the flex cable when trying this on a couple broken ipod boards i have. I’ve tried using my cheap hot rework station set to 250c and also soldering iron and adding flux then using wick to remove the solder but still can never get the soldered pads to lift off the board without ripping.

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Indice 0
Ajouter un commentaire

1 Réponse

Is a delicate job, in my case i use only the soldering pen and a lot of tin. But even more easy I just change this part, or you can transfer it from the new one.

Block Image

Cette réponse est-elle utile ?

Indice 0
Ajouter un commentaire

Ajouter une réponse

John Nguyen sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 2

Total : 24