Aller au contenu principal

Modèle A1238 / avec disque dure de 80, 120 ou 160 Go / façade en métal noir ou argenté

904 questions Voir tout

Replaced headphone jack -how does the ribbon attach to the plastic tab

Taken apart my ipod as per instructions, all good except cant get the headphone jack ribbon to connect to lift up plastic tab. There doesn’t seem to be any clamp on it to hold the ribbon in place.

I don’t think anything broke off on removal, Old ribbon looks the same as new one.

Be grateful for any advice on how to secure the ribbon and ensure good contact.

many thanks

martin

pictures added showing orange tab in up and down position

Block Image

Block Image

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Indice 0
Ajouter un commentaire

1 Réponse

Réponse la plus utile

@mjw01 there has to be a plastic tab that gets flipped up to disconnect and pressed down the reconnect the cable.

Block Image

Check to see if it is in the down position. If it is not then it is missing. Post some good pictures of the connector with your QUESTION so we can see what you see Ajout d'images à une question existante

Update (11/15/2019)

@mjw01 okay so just checked one of my boards and looks the same.

Tab open

Block Image

Tab closed

Block Image

All you would have to do is to insert the ribbon cables between the tab and the connector and close the tab

Block Image

Cette réponse est-elle utile ?

Indice 3

2 commentaires:

Thanks for the reply, photos now added

par

Thanks @oldturkey03 appreciate the help. I agree it looks the same but the tab doesn’t seem to hold in place when it is closed and I’m worried the connection won’t be made.

I’ll have a go and test it before I close it up. Any other suggestions welcome! (tape the connector in the closed position ?)

par

Ajouter un commentaire

Ajouter une réponse

Martin whitchurch sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 3

7 derniers jours : 4

30 derniers jours : 6

Total : 57