Aller au contenu principal

Version revisitée de l'iPhone 3G avec une vitesse de traitement plus élevée. La réparation de ce modèle est similaire à celle du 3G et nécessite de simples tournevis et outils pour faire levier. Modèle A1303 / capacité de 16 ou 32 Go / coque en plastique noir ou blanc.

1500 questions Voir tout

Mute button isn't working.

Hello,

The mute button on my iPhone 3GS isn't working. It suddenly stopped, I think it's the flex cable but what else could ik be? I isn't the button itself because that still looks good and can go up and down.

I could also make a picture of the inside if that helps.

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Indice 0
Ajouter un commentaire

3 Réponses

Solution retenue

The ribbon would be the cheapest option, however coming from experience that little ribbon is a real pain in the #@# to install and requires lots of patience. If you want you can just buy a totally new back assembly and that will have a new ribbon installed for your convenience, however this option does cost a little bit more.

Here is a link to the Ribbon

Here is a link to the Back assembly

Also if you are unfamiliar with the repair process here is the link to a back assembly replacement guide, [lien de tutoriel non valide] is the link to the ribbon replacement guide. Please note that the link to the Back Assembly guide does link to a Battery replacement guide but it still shows you all of the principles involved in the replacement.

Hope this helps :)

Image iPhone 3G/3GS Headphone Jack Assembly

Produit

iPhone 3G/3GS Headphone Jack Assembly

$14.99

Cette réponse est-elle utile ?

Indice 3

2 commentaires:

Thank you very much for the fast and clear response!

I just orderd a flex cable, because I repaired iPhone's before so I know a little bit how to work with it. But if that doesn't work out I will buy a whole new back, it may be expensive but you get a new battery to so better battery life!

par

Thanks for accepting my Answer! :) And yes you do get a new battery as well so its a win win :) Good Luck!

par

Ajouter un commentaire

The brackets around the power button on top of the 3G and 3GS are notoriously weak. When they break it can cause the power button to stop working.

If this is the case (pun intended), you will need to replace the rear case.

Cette réponse est-elle utile ?

Indice 1
Ajouter un commentaire

It could easily be the flex ribbon. The mute button also does wear out itself over time too, but if you change the ribbon, it should be okay. It just wont be as crisp and sharp as it was when new. Change the ribbon and report back.

Cette réponse est-elle utile ?

Indice 0
Ajouter un commentaire

Ajouter une réponse

Jesse de Boer sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 2,671