iFixit Toolkit cannot open Dell XPS 13 9350 battery

Question

Dell XPS 13 (9343/9350/9360)

Commercialisé en janvier 2015, le portable XPS 13 se veut un concurrent du MacBook Air, avec un "écran sans bordures " et une option de mise à niveau à écran tactile.

75 questions Voir tout

Cosmas @cosmasaay

Rep: 1

Publié: 15 janv. 2020

Options

iFixit Toolkit cannot open Dell XPS 13 9350 battery

I have bought "iFixit Pro Tech Toolkit - Electronics, Smartphone, Computer & Tablet Repair Kit" in order to change my XPS 13 9350 battery.

I successfully open the bottom case and able to open 2 screws at the right part of the battery.

But I could not open the 2 screws on the left part of the battery (please see attached file with circle in red color). I have tried all head styles of iFixit, but none can open the screws.

Appreciate any help. Thanks

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Oui Non

Indice 0

Ajouter un commentaire

2 Réponses

crtrue @crtrue Rep: 289 3 · Answer 1 · 2020-01-15T20:24:36-07:00

Réponse la plus utile

crtrue @crtrue

Rep: 289

3

Publié: 15 janv. 2020

Options

You don't seem to have uploaded an image so it's a little hard to tell, but according to the guide they should just be regular Phillips head screws. It's possible they got stripped if too much torque was applied, can you try uploading or linking an image again?

Cette réponse est-elle utile ?

Oui Non

Indice 1

4 commentaires:

Uups, sorry forgot to attach the picture, thanks for remind me.

I have used all the head screw styles, but none of it match.

15 janv. 2020 par Cosmas

It's harder to tell for the one at the top but the bottom one is definitely stripped which is why you are probably having issues with it. But it is standard Phillips.

15 janv. 2020 par crtrue

The chassis will probably flex a bit when trying to unscrew those screws so I would say put opposite pressure under the screw under the chassis with your hand and use a PH00 / J00 or larger screw tip. Smaller ones will just cause it to strip.

15 janv. 2020 par Ben

@cosmasaay - Can you take a tighter picture of the top Black screw.

It looks like a tri-point, you will likely need a Y0 or Y1 bit

16 janv. 2020 par Dan

Ajouter un commentaire