Rep: 37
2
Printer shows Orange error LED. Supposed to mean out of paper or paper jam. Trouble is, there is lots of paper, and there is no jam. Printer works fine in manual feed. Will not feed from paper tray. Rollers have been cleaned. Any ideas how to get the LED to turn off and enable printing from paper tray?
Drum and toner are brand-new .
Cette question est-elle utile ?
Rep: 13
1
The Real Answer can be found here
Cette réponse est-elle utile ?
bait & switch--they just want to sell toner. don't waste your time
Rep: 13
1
Please check the back panel of your printer, may be there is any some piece of paper available inside the printer, that’s why you are getting this error.
Cette réponse est-elle utile ?
Rep: 25
1
As @theprinterman alludes to above, the real problem is something called the “drive gear engagement arm” - and if you’re feeling even *slightly* handy, you can fix this - with nothing more than a spudger (or a butter knife).
See here: HL-2280DW paper feed not working
Cette réponse est-elle utile ?
FIXED! Thank you so much.
Dernières 24 heures : 1
7 derniers jours : 8
30 derniers jours : 24
Total : 2,687
1 commentaire
I had this printer for many years and never had a problem with it, printing large files. I had to move things around, and when restarting recently it just did not want to work at all, never got a sheet through. Bought another newer unit on EBAY, and it does the same. I believe the newer drivers or program does not allow enough time for the paper to load. I would like an original driver. Maybe I have the the floppy I started with. In all my years I just loaded the tray and forgot about IT! The new driver is not even Brother.......OH BROTHER!! TOM
par Thomas