Réparez vos affaires Communauté Boutique

Tutoriels de réparation et assistance pour votre téléviseur LG.

1336 questions Voir tout

Options

LG 43UK6300 - Audio & Backlight, but no Video

I was given an LG 43UK6300 which has Audio & Backlight, but no video.

The TV seems to turn on and off as expected and if i hit netflix button the white noise with no channels goes away and comes back if i hit the TV button. This tells me that the motherboard is working fine.

Originally i didn’t see any damage to the TV, so i decided to bake the motherboard in case its a loose connection on the chip. Upon removing the unit, i noticed that one of the transistors is burnt. When i look back at the original pics, it was burnt as well.

I have checked all the transistors legs to ground and i am getting 80 Ohm on the emitter and KOhm on the other two legs. For voltage, i have 13V on one of the legs and 10.5 on the other.

Looks like the panel is not bad, but wondering if there is a way to confirm this. I could possibly buy a replacement board, but if somehow can find the transistor model #, i could solder it in too. How do i go about finding the part # for the transistor.

Also is there anything else that i should check as well to ensure its not the panel.

Block Image

Block Image

Block Image

Block Image

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 0
Ajouter un commentaire

2 Réponses

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s
Réponse la plus utile

Options

To check if there is a problem with the panel, power on the TV (standby LED turns off) and measure LCD voltage on the 50V SMD capacitor by the #1 LVDS connector on mainboard. If with both LVDS flat cables plugged into the MB you get 0V, but with them plugged out of MB you get 29-30V, then there is a fault in the panel. Unfortunately LG sets made in 2018-2019 with BOE panels - at least on European market - develop fault(s) in panels. As per the service manual for 43UK6300PUE: for BOE panels, the mainboards (and panels) have 68 pin LVDS connectors, as opposed to 60 pins for LGD panels.

Cette réponse est-elle utile ?

Oui Non
Indice 1

2 commentaires:

@sim0n take a look at the last two images posted with the original question. Seems to be more going on with it

par

Okay. On my board that transistor has a marking of KFJ044.

par

Ajouter un commentaire

Options

@arbitarytwist not sure about this “This tells me that the motherboard is working fine. “ with a busted transistor. There are no schematics for your main board so you would have to either replace the board or get someone with that same board to figure out that transistor.

Cette réponse est-elle utile ?

Oui Non
Indice 0

4 commentaires:

Anyway for me to verify that the panel is ok ? Dont want to get another board if panel is the problem.

par

I would like to trouble shoot it a bit more to figure out the real problem rather than just buying the board and blowing another transistor. Help would be appreciated.

par

I agree since there is most likely a reason why the transistor blew. Problem is that without a circuit diagram this will be extremely difficult.

par

@oldturkey03 - So i did a bit more digging and following are the voltage readings i got

OFF (V) ON (V)

B 7.8V 10.5V

E 7.8V 13 V

C 0V 0V (No Transistor in Place)

This makes me think its a PNP transistor. I am wondering what i can use as a transistor to make this work.

par

Ajouter un commentaire

Ajouter une réponse

Albert Einstien sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 13

Total : 746