Aller au contenu principal

L'Apple iPhone 5s fut annoncé le 10 septembre 2013. La réparation de ce modèle est très similaire aux modèles précédents et requiert des tournevis ainsi que des outils pour faire levier. Disponible en version GSM ou CDMA, 16/32/64 Go de stockage et en argent, doré ou gris sidéral.

3530 questions Voir tout

iPhone in DFU turns off when restoring iTunes

This iPhone 5S boots into Recovery mode. When connecting to iTunes and clicking restore, the device turns off right after the extracting software step. Then restarts into DFU.(iTunes err 4013)

Any ideas? Thank you!

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Indice 0
Ajouter un commentaire

2 Réponses

Solution retenue

Error 4013 is cause by a misbehaving NAND or just flat out faulty NAND. First I would try other tools before you declare this phone bricked. Like try to use 3u tools or something like that. Typically if a device can’t leave DFU mode then the logic board needs to be repaired.

Cette réponse est-elle utile ?

Indice 0

1 commentaire:

Thank you for the tool. It seems really handy. Indeed, it can see the iPhone, but it can't determine how much storage it has. So i think it is safe to assume the NAND is dead.

par

Ajouter un commentaire

You can try to to connect it to itunes and click on restore without the screen attached to the iphone. Afther that you can connect the screen back to your iphone, but don’t forget to disconnect battery first before putting back your screen.

Cette réponse est-elle utile ?

Indice 0

1 commentaire:

Unfortunately, this did not fix the issue on this specific device. I will keep this tip in mind though for possibly fixing some of my other bricked devices.

par

Ajouter un commentaire

Ajouter une réponse

Max Tech sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 4

Total : 1,123