Réparez vos affaires Communauté Boutique

Tablette haute performance lancée par Apple le 11 novembre 2015. Modèle A1584.

131 questions Voir tout

Options

iPad pro 2nd gen changed screen, worked but not now.

So I changed screen and glass on ipad pro 2nd gen.

I tested the screen, touch and everything worked perfect, I then added “glue” and closed down the ipad, I then headed the ipad up and placed the ipad in press over night.

Which I do to every ipad I repair.

The customer then came in and picked up his ipad, few hours later he called me and the touch does not work what so ever.

What am I doing wrong?

I fixed an ipad pro 3rd gen same time and did the same procedure and touch works perfect on that one.

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 0
3 commentaires

Did you use actual glue or adhesive strips?

par

Please elaborate on what you mean by "glue"

par

Adhesive strips and sometimes 3m if the screen did not come with adhesive.

par

Ajouter un commentaire

2 Réponses

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s
Solution retenue

Options

The only thing I could imagine is that the digitizer was bent after the inspection during the placement/pressing of the screen. Regardless, a new screen should do you just fine. I hope it comes in time before your customer gets too mad!

Cette réponse est-elle utile ?

Oui Non
Indice 0

4 commentaires:

I will need to inspect frame tomorrow then.

par

Definitely worth a shot. I had a customer that brought in an iPad with a bent frame and I had only realized it after installing the new screen. Even the pressure from installing it on the slightly bent frame was enough to permanently damage the digitizer and I had to put on a new one. Good luck!

par

@n0v0 After looking at it closely with new screen, its bent barely noticeable at the bottom right corner.. I avoided touch issues now by being a bit carefull around that corner.

par

@vitoscaletta Glad I could help! Bent frames are a killer!

par

Ajouter un commentaire

Options

open it back up and reseat connectors. Also inspect them for damage. Where did you source the screen from?

Cette réponse est-elle utile ?

Oui Non
Indice 0

3 commentaires:

I have done that multiple times, still no response. I have my supplier in hk, which I buy a lot of screens and parts.

par

@vitoscaletta have you tried another screen yet?

par

@hootonberg nope, have to wait for them to arrive, but I bought two just to be safe :P I might drop the press now or heat just to be sure.

par

Ajouter un commentaire

Ajouter une réponse

nicolay.94 sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 3

Total : 137