Aller au contenu principal

Can’t find the t-con on my TCL 55” - 55s423

Block Image

Where is the t-con located? Matched the model # and ordered the board. It doesn’t go anywhere and the back doesn’t appear to even have the t-con board.

Block Image

Block Image

Block Image

Block Image

Update (10/19/2020)

It would make sense that it’s connected to the main. But it’s just connected to the thin board at the bottom. Including a pic of the t-con I ordered. BTW- Austin, Tex here!

Block Image

Update (10/19/2020)

Up close of board.

Block Image

Update (10/19/2020)

Clearer pic of the board.

Block Image

Update (10/19/2020)

Clearer pic of the board.

Block Image

Update (10/19/2020)

Okay. This is a close-up of pic #3.

Block Image

Block Image

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Indice 1
2 commentaires

I am having the same problem. Did you manage to repair it?

par

My 55s425 has the same skinny board..... i just replaced the LED strips and to my surprise it only had two rows of LED strips inside (a total of 4 sections) .... all the newer designs now have twice as many rows and a separate T-Con board ..... but they probably run a LOT cooler as a result.....

par

Ajouter un commentaire

2 Réponses

Solution retenue

It was integrated. There are three different setups for this particular model. This is the version 5 setup. Main board contains the T-con.

Cette réponse est-elle utile ?

Indice 0
Ajouter un commentaire
Réponse la plus utile

@phonee the only place it can be is at the end of the ribbon cable from the main board. Take a couple of clear pictures of that board. If that is the LCD driver board (to far away and to unclear to determine this from this picture) then your T-con board is part of the main board. Post some good, clear, up close pictures.

Cette réponse est-elle utile ?

Indice 2

4 commentaires:

I updated with new photos.

par

From Austin here. See you’re from San Antonio. Howdy. I repair iPhones and this is new to me.

par

Hey. So it looks like image #3 shows the LCD driver board. Can you get a bit more from that particular board. If it is the LCD driver board that would mean your main board has an integrated T-con board. There just is no other place where it could be.

par

Just posted. It has to be integrated... Right?

par

Ajouter un commentaire

Ajouter une réponse

Phone E sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 4

7 derniers jours : 18

30 derniers jours : 76

Total : 2,601