Aller au contenu principal

Accessoires pour les consoles de jeux Microsoft. Réparer les accessoires de consoles de jeux est un jeu d'enfants avec les bons outils.

131 questions Voir tout

Xbox one Elite 2 controller missing components near right joystick

Hello,

I’ve got a problem with an Xbox Elite 2 Controller. I replaced the right joystick and it works fine except that it does not register a button press of the right joystick.

In the process I may have knocked off two components right next to it:

Block Image

Any help with identifying the missing components and what to replace them with is much appreciated.

Update:

I really want to know, so I got my hands on another one of these that needs fixing for a good price. This is what the components look like:

Block Image

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Indice 0
Ajouter un commentaire

3 Réponses

Réponse la plus utile

If anyone cares, I managed to fix it. The lower component is a 32 ohm resistor. I just searched old junk PCBs and took one that fits. The upper component is a diode and this one is not critical.

Also there was a broken trace, so I soldered a jumper wire from the button switch to the 32 ohm resistor and everything was working ok then. I skipped replacing the diode because it’s too much trouble in that awkward spot with the broken trace. No clue what the diode is there for.

Desoldering that joystick module was a PITA because the PCB somehow eats up a lot of heat. Much more annoying to work on than the previous controllers! Now all is good :-)

Cette réponse est-elle utile ?

Indice 2
Ajouter un commentaire

Probably the same as the capacitor next to it. usually when a component forks off in two directions like that the caps are identical.

Cette réponse est-elle utile ?

Indice 0

2 commentaires:

Hi there, thanks! I uploaded another picture with the two components on the board. The component looks different than the cap. Could it be a resistor? The one above it is a small black box, a bit taller than the cap. It's connected by two traces. Could it be a diode maybe?

par

i cant really tell what it is in the second photo, to blurry. It kinda looks like a switch,

par

Ajouter un commentaire

Hey Chris,

Thank you for posting this! Because of you I was able to fix a elite 2 controller I bought for a good price to fix. I had given up because there were some components missing but because you found out it wasn't a necessary component I just put in New sticks and tried it and voila it works again. Now I need a new battery because the one that is in there is swollen. Anyways thanks for all your hard work it has really helped me with my controller :)

Cette réponse est-elle utile ?

Indice 0
Ajouter un commentaire

Ajouter une réponse

Chris sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 6

Total : 306