Réparez vos affaires Communauté Boutique

iMac Intel 27". EMC 2309 (fin 2009, Core 2 Duo 3.06 ou 3.33 GHz), EMC 2374 (fin 2009, Core i5 2.66 GHz ou Core i7 2.8 GHz)

467 questions Voir tout

Options

changing vertical lines on screen // none in recovery mode

I executed a factory restore on this Imac and installed Catalina.

ISSUES — The problems I am having are shown in the attached image.

  • Lines on screen change in appearance
  • None appeared during the 15hr+ multi-pass format of the drive

ATTEMPTED — These are processes I have attempted.

  • Factory restore and clean OS install

Any information or suggestions appreciated as the Genius Bar is 2-3 weeks booked due to the current state of the world.

Stay safe all!

Block Image

Block Image

Block Image

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 0
Ajouter un commentaire

1 Réponse

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s
Solution retenue

Options

Sadly Apple won’t service your system as its too old ;-{ Vintage and obsolete products

As to your systems problem, your GPU boards VRAM chips have a problem!

Block Image

Its a fair amount of work to take out Démontage et réparation de la carte vidéo iMac Intel 27" EMC 2374, AMD Radeon HD 4850 in this case I don’t see baking as a solution as the VRAM chips don’t suffer the same way the GPU chip does. Morelikely you’ll need to replace it.

As to why In Recovery or Target Disk Mode the screen doesn’t have this issue. Your system has in fact two! Graphics engines. The discreet one (AMD Radeon) but a second one within the CPU! Intel graphics. When you first start up your system you are using the Intel graphics and then it switches over to the AMD GPU.

Cette réponse est-elle utile ?

Oui Non
Indice 1
Ajouter un commentaire

Ajouter une réponse

Marshall Prather sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 2

Total : 37