Aller au contenu principal

La montre connectée quatrième génération d'Apple, avec connexion aux réseaux mobiles en option, mise sur le marché le 21 septembre 2018.

Questions au sujet de 89 Voir tout

How to remove the digitizer (no glass) from OLED panel?

I tried to do a glass-only repair and remove the OLED+digitizer+polarizer from the (cracked) glass instead of removing the digitizer+polarizer+glass from the OLED panel. It didn’t go well… I have a polarizer (I think) that’s flaking off and a small bubble imperfection on the edge of the digitizer. The display and touch both work, but I can’t reassemble it this way. Photos attached.

How do I remove the digitizer from the OLED panel without ruining the OLED? I tried heat once and it burned the OLED, presumably since there was no glass to act as a heat sink. What’s the best way to do this? I really don’t want to ruin the panel… they’re so expensive. Thanks in advance!

Block Image

Block Image

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Indice 0
Ajouter un commentaire

2 solutions

Solution retenue

I ended up *very carefully* separating the digitizer from the OLED panel by using a 0.05mm molybdenum wire. Lots of glue rolling ensued. Now I have a fully functional bare LCD/OLED panel. Ordered a new glass with digitizer and then I’ll be set.

One YouTube example used a hot decal scraper and that was just too scary for something so small. No thanks.

Cette réponse a-t-elle été utile ?

Indice 0
Ajouter un commentaire

Sadly I have not found anyone with the needed skills or tools to replace the watch crystal reusing the panel without having visible defects. In the end I just replaced the full assembly.

Cette réponse a-t-elle été utile ?

Indice 0
Ajouter un commentaire

Ajouter une réponse

J.R. Murray sera éternellement reconnaissant.
Afficher les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 2

Total : 37