Aller au contenu principal

Model A1989, EMC 3358. A refresh of the existing design, with updated processor options and a change to the keyboard materials. Available in Silver and Space Gray. Released in May 2019.

133 questions Voir tout

Repair of Floppy LCD/Cover

I recently replaced the LCD on my 2019 MacBook Pro 1989 and all was well until it sounded like something snapped (not loudly) and now the LCD/cover no longer stays up. It either flops closed or backwards. Zero tension on the screen to hold it up (no side-to-side wiggle). The hinges connecting the LCD to the body are tight. I think these hinges are clutch type hinges, so perhaps something went awry with the clutch?

Anyone ever faced this situation? Hopefully repairable without a new LCD. I have the old hinges from the original LCD. Assuming I need to disassemble the entire LCD and troubleshoot?

(I used these instructions to make the LCD replacement — Remplacement de l'écran du MacBook Pro 13" Touch Bar 2018)

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Indice 0
Ajouter un commentaire

1 Réponse

You’ll need to get a replacement display from the supplier as it was defective!

Cette réponse est-elle utile ?

Indice 0
Ajouter un commentaire

Ajouter une réponse

Scott Woodward sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 26