Aller au contenu principal

Deuxième génération de l'iPhone. Modèle A1241 / capacité de 8 ou 16 Go / coque arrière noire ou blanche. La réparation est plus simple que pour l'iPhone de première génération et nécessite des tournevis, des outils pour faire levier et une ventouse.

1158 questions Voir tout
Question close

Can not pick up wi-fi signal

I have been piddling with replacing iPhone digitizers and have run across several that will not pick up on any wi-fi signal right net to a known good one that will get a signal . On 2 of these there was corrosion on the wi-fi chip on the back of the board which i sprayed with contact cleaner and hit with a toothbrush pretty good with no resolve. I have scoured the net to the best of my ability and hoped that one of the pros here could give me some better ideas. It must be pretty common because i have seen several this way

-thanks in advance

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Indice 0
Ajouter un commentaire

2 Réponses

No answer here but I too am looking for a resolution to this problem... hope someone notices

Cette réponse est-elle utile ?

Indice 0
Ajouter un commentaire

I gave up - after much part swapping I came to the conclusion that it is a logic board issue. I have seen several phone with this problem.

Cette réponse est-elle utile ?

Indice 0
Ajouter un commentaire
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 3,294