Réparez vos affaires Communauté Boutique

2nd Generation high performance tablet computer released by Apple on June 2017. Model A1670.

41 questions Voir tout

Options

Is soldering required to replace *just* the digitizer?

I have a 2nd gen iPad Pro 12.9” and about a month after I bought it, it got dropped and cracked the digitizer. I finally found a decently-priced replacement and was looking at repair videos. To my alarm, it looks like the repair involves microsoldering. Is this the case? Is it literally easier (but ridiculously more expensive) to buy the full LCD assembly with the daughtercard and replace that instead?

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 0
Ajouter un commentaire

1 Réponse

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s
Solution retenue

Options

Not only it requires soldering but plenty of other tools as well since the digitizer is glued to the display. Display - glue - digitizer - glue - glass. Older iPads had it separate making the replacement a lot easier. The part you need to desolder has chips on it which I believe are married to the motherboard. No matter what screen or digitizer you get you’ll need to desolder it and solder it onto the new assembly.

Cette réponse est-elle utile ?

Oui Non
Indice 0
Ajouter un commentaire

Ajouter une réponse

Mike Morkes sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 3

30 derniers jours : 8

Total : 156