Réparez vos affaires Communauté Boutique

Lancé le 4 novembre 2017. Modèles A1868, A 1901. Disponible avec GSM ou CDMA /  64 ou 256 Go / argent et gris sidéral. (Se prononce "iPhone 10".)

1198 questions Voir tout

Options

Face iD Not working due to proximity sensor failure.

I have a iPhone X on which I performed a screen repair, Iam a regular worker and know my stuff. I performed all the steps which are necessary to retain the face id and I succeeded too but only temporarily. After a month or two my face id stopped working, my phone's proximity sensor doesn't works due to which true tone has also vanished. Portrait mode does not works either. Can anyone help me out on how to restore proximity sensor? I know for sure if i get it up and running again then face id will work like a charm. Any suggestions, ideas, help will be appreciated.Thanks

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 0
Ajouter un commentaire

2 Réponses

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s

Options

hello ashhad,

I wrote to someone about such a problem a moment ago - it still happens. Make sure that the proximity sensor is not working: call your inbox and cover the mesh of the speaker with your finger during the call. If the screen turns off - the sensor is working. Additionally, make sure that the light sensor is working - put a working phone under a strong light bulb - if the screen brightens by itself, the sensor is working. If any of these tests fail, write - I'll tell you what to do next.

In general, you will need to test voltages and resistance check the entire tape of the talk speaker along with the sensor bank and the "Flood Illuminator" sensor.

Cette réponse est-elle utile ?

Oui Non
Indice 0

2 commentaires:

I have the same problem. Bought a new sensor with flex. I cleaned the sensor and Face ID still is not available

par

Light sensor not working

par

Ajouter un commentaire

Options

Your Earspeaker flex might be torn or broken ribbon. So transfer the parts like proximity sensor and flood illuminator from old to new flex.

Cette réponse est-elle utile ?

Oui Non
Indice 0

1 commentaire:

This requires some pro level skills and equipment both of which I don't have......

par

Ajouter un commentaire

Ajouter une réponse

ashhad nizamani sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 3

7 derniers jours : 7

30 derniers jours : 34

Total : 1,012