Aller au contenu principal

Version revisitée de l'iPhone 3G avec une vitesse de traitement plus élevée. La réparation de ce modèle est similaire à celle du 3G et nécessite de simples tournevis et outils pour faire levier. Modèle A1303 / capacité de 16 ou 32 Go / coque en plastique noir ou blanc.

1500 questions Voir tout

phone does not start properly after replacing rear panel and battery

I followed the 3GS replace rear panel / replace battery guide.

Once complete I tried to start, nothing happened.

I connected to laptop via usb. Phone screen is illuminated and apple logo appears for approximately 4 seconds, the switch off, and the same over again.

I assume without being aware I made a mistake in re-assembly, or even broke something during the action.

Does someone can advise what component / cable / connector might be affected?

Obviously the screen works, and something electrical works.

Thanks

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Indice -1
Ajouter un commentaire

1 Réponse

Réponse la plus utile

1st I would just try to charge the battery thru wall outlet. Give it a couple of hours. Sometimes new batteries need to be charged.

Cette réponse est-elle utile ?

Indice 2

1 commentaire:

check the screw under and next to the "do not remove" sticker, they keep the motherboard in contact with the battery terminals.

par

Ajouter un commentaire

Ajouter une réponse

Danyel Ceccaldi sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 516