Aller au contenu principal

Le smartphone haut de gamme Apple de l'année 2020. Annoncé le 13 octobre et commercialisé le 13 novembre, l'iPhone 12 Pro Max inclut un écran OLED 6,7", une triple caméra arrière avec LiDAR et la connectivité 5G. Successeur de l'iPhone 11 Pro Max.

105 questions Voir tout

How do I replace the camera lens bezels?

The long and short is that I ran my phone over with my bike. Had I had a slighty more durable case, everything would be fine. The phone is otherwise flawless - a testament actually to the durability of the phone (something I thought I’d never say…).

In any case, I see there are the lens replacements (with bezel) available from the store (see link). However, there are no guides to actually do this procedure. Is it worth my time or should I just install a new lens?

Block Image

iPhone 12 Pro Max Rear Camera Lenses and Bezels

Image iPhone 12 Pro Max Rear Camera Lenses and Bezels


iPhone 12 Pro Max Rear Camera Lenses and Bezels


Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Indice 0
Ajouter un commentaire

1 Réponse

It’s not something you’ll want to do if you don’t need to. It’s a very delicate procedure. You’ll want to heat up the adhesive of the broken bezel enough so you can carefully remove all the broken glass and adhesive. Be very wary not to scratch the camera lens during glass removal. If you’re worried about scratching the camera lens, you can remove it prior to chipping the glass. Clean it up a little more with alcohol. Once the surface is clean, putting the new bezel on is pretty straight forward.

Cette réponse est-elle utile ?

Indice 0

7 commentaires:

Does this mean the bezel is externally replaceable; it does not require disassembly of the phone, only removal of the bezel directly?


Yeah. You don’t have to take anything apart. It’s pretty much a piece of glass that’s glued to the outside of the phone. If you want to be extra careful and take the cameras out, you’ll need to open up the phone. In some cases, it’s easier to take the cameras out and push the bezel out from the inside. But from your picture, it looks like you’ll have to just pick at the outside.


Thank you. But this isn't quite the question i was asking. I am talking about the metal bezel surrounding the glass. I have had the glass replaced already but the selling of a replacement bezel indicates that the bezel is itself replacable.


Colin, you are describing how to replace the lens. The bezel is the part that holds the lens. I am trying to figure out how to do this as well.


@cirofirvine did you have any luck with this?


Voir 2 commentaires en plus

Ajouter un commentaire

Ajouter une réponse

Archie Campbell sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 8

30 derniers jours : 58

Total : 2,677