Rep: 55
5
2
After replacing the Digitizer & LCD to a customer's iPod Touch 4th Gen, I still get no response from the screen. I know it's not the screen because i swapped out four different Digitizer & LCD screens. The LCD screen lights up. The connector to the Digitizer does not look damaged at all. The broken screen worked just fine before I removed it.
Any ideas?
Cette question est-elle utile ?
Rep: 369
5
5
It sounds like the the cable connector is not plugged in .
Or the cable itself is damaged even though it looks ok.
Or else you got a bad dig/lcd assembly.
Only thing to do is try a new assembly. Good luck.
One thing eveybody should do is to test it before glueing it down.
Cette réponse est-elle utile ?
I've tried four different screens. Still having the same problem with all four screens. And I did end up putting those four screens in different ipods, and they worked in those.
Rep: 369
5
5
The only other assumption is that the connector on the motherboard is broken. Must have gotten damaged while trying to plug it in.
I feel your pain.
Cette réponse est-elle utile ?
Dernières 24 heures : 0
7 derniers jours : 0
30 derniers jours : 2
Total : 594
