Aller au contenu principal

IMac Intel 27 ". EMC 2309 (fin 2009, Core 2 Duo 3.06 ou 3.33 GHz), EMC 2374 (fin 2009, Core i5 2.66 GHz ou Core i7 2.8 GHz)

467 questions Voir tout

Where to place optical fan sensor on an SSD/Optibay adapter.

My optical fan rpm's are going over 2500 since I installed an SSD in the dvd superdrive slot. I got the adapter from ifixit, but not sure where to put the sensor. Right now, i've got it in roughly the same area it was with the dvd drive, but I think it's running way too hot/fast. Any ideas to get that fan to calm down??

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Indice -1
Ajouter un commentaire

1 Réponse

Solution retenue

Here's an installation of a SSD in a iMac. Note the placement of the temperature sensors.

http://www.thatsiebguy.com/2009/10/iMac-...

If this does not fix the problems then we need to look at fans control resets

Cette réponse est-elle utile ?

Indice 1

3 commentaires:

An SSD drive should run much cooler than a standard drive as there are no moving parts.

par

Here's where to download a fan conrtol for the iMac: http://www.macupdate.com/info.php/id/230...

par

That installation is using an SSD to replace the main HDD. My installation replaces the DVD superdrive. Any knowledge where the coolest place on that side of the iMac is to place the sensor?

par

Ajouter un commentaire

Ajouter une réponse

hellohogo sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 3,437