Rep: 1,3k
10
3
1
If you're anything like me, your fingers aren't needle-nosed pliers. I struggled to remove the tightly-packed bits until I wrapped a rubber band around it and then easily pulled it out. Now whenever I open the kit up, I make sure to have a rubber band nearby so I can quickly and easily get to the bit I need.
Cette question est-elle utile ?
Rep: 1,3k
10
3
1
Thanks for the advice oldturkey03 :D
Here's that: Technique pour retirer les embouts du 26 Bit Driver Kit iFixit
Cette réponse est-elle utile ?
Thanks Jamy, I tried this...handy when you don't have a rubber band around, but with a rubber band, it's even easier.
Rep: 23
4
2
I always put the handle over the bit I want to remove, pull outwards and then upwards, remove the bit from the handle, turn it around, put it back in, and presto :)
Cette réponse est-elle utile ?
Dernières 24 heures : 1
7 derniers jours : 9
30 derniers jours : 22
Total : 1,159
2 commentaires
Asked and answered myself. Mainly here in hopes someone else might benefit from the little tip.
par aaronmiller
aaronmiller, it's really not a repair related question ;-) but most certainly a great idea. I think you should take a couple of pictures and create a guide to have it posted on ifixit. http://www.ifixit.com/Guide/new I think that would be very helpful and a neat little guide to have.
Split your original question. Create one true question, and post your tip as an answer. You can even accept your own answer....:-)
par oldturkey03