Aller au contenu principal

Device showing cover is open after reset

I tried several times to reset the HP sprocket 2 in 1 but it still shows the cover is open. What else can I try?

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Indice 0
Ajouter un commentaire

1 Réponse

@rinahannon try this first:

Reset the Sprocket with a straight pin to clear any errors.

  1. Turn on the Sprocket.
  2. Remove the paper cover by sliding it away from the output slot, and then set it aside.
    1. Slide the paper cover
    2. Remove the paper cover
  3. Locate the Reset button.

Block Image

  1. Gently insert a straight pin into the reset button access point, and then press the Reset button for 3 seconds.
  2. The Sprocket resets and turns off.
  3. Turn on the Sprocket.
  4. from here

Cette réponse est-elle utile ?

Indice 0
Ajouter un commentaire

Ajouter une réponse

rinahannon sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 4

30 derniers jours : 10

Total : 150