Réparez vos affaires Communauté Boutique

Modèle A1312 / Mid-2011 / processeur 2.7 & 3.1 GHz Core i5 ou 3.4 GHz Core i7, ID iMac12,2

708 questions Voir tout

Options

J9001 something inside blocks my cable connector

Block Image

Block Image

Imac genius, refer to my two photos, do i need buy a top magnifier to check what inside J9001 is blocking my cable connector?

I see 12 metals from above. Which pin(s) block me? What is doable to enable cable connector insertion 100% into board connector?

(Out of careless mistake, my screen fell down desktop last week. The connector is partially broken)

Block Image

Update (06/13/2022)

Block Image

This is my existing insertion situation.

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 0
Ajouter un commentaire

2 Réponses

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s
Solution retenue

Options

You need a new connector at its physically damaged. There is no means to make this work as the socket pins are a fork type. While you might be able to insert the cable end it won't make electrical contact with the mating connections.

As much as I would love to offer you a magical answer to make this work I just can't (nor anyone else can either).

Cette réponse est-elle utile ?

Oui Non
Indice 0

1 commentaire:

Thx Dan. Soldering on such very narrow space is like launch a rocket to the moon to me... Cannot shake hands, must have eagle eyesight... I will try buying some used tools to fix it asap. Thx your insights and selfless sharing. U give me a hope.

par

Ajouter un commentaire

Options

Block Image

Block Image

Hi Dan,

I fixed it.

After purchasing the original logic board connector from taobao, I realise that a quick fix is to remove the front cover, and erect the 6 pins upright 90 degree to the floor.

The board connector & cable connector at J9001 eventually fits to each other firmly.

My solder skill too poor. I am too poor to buy a professional hot wind gun. The above solution is quite happy to me.

Thanks Dan. I posted my previous wrong thoughts and my final outcome. Just use a mini 1-shape screwdriver to erect the pins...fixed it...the pins were tilted to screen side (as opposed to electric power back side ) due to screen drop onto desktop.

Cette réponse est-elle utile ?

Oui Non
Indice 0
Ajouter un commentaire

Ajouter une réponse

pmp calvin sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 4

Total : 124