Réparez vos affaires Communauté Boutique

Informations de réparation et de démontage pour l'iPhone SE de deuxième génération, annoncé et mis sur le marché en avril 2020.

239 questions Voir tout

Options

iPhone SE 2020, restarting every 180s because of tg0b, board defect?

Hello Guys, i need help. I have an iPhone SE 2020, replaced screen (by me) which is now kernel panicking and restarting every 180s (has nothing to do with the kernel panicking, screen replacement was done now a year ago). It has no obvious pry damage, the mosfet by the battery connector is still in place and not moveable. With both the OEM Battery and a new 3rd party one the kernel panic keeps happening as well as the 0% battery charge thing. In the logs "missing tg0b" is stated. When starting without the dock and front camera flex attached the logs state "missing tg0b and mic1", so i suppose its a board issue? Any tips?

Update (07/26/2022)

Block Image

The battery connector

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 1
1 commentaire

One of the data pins looks to be pushed into the plastic but I cannot be certain. The measurements you took are okay.

par

Ajouter un commentaire

3 Réponses

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s
Réponse la plus utile

Options

This does sound like a battery data problem. The first thing to check would be the battery connector as they are known to be problematic on this model. Check the pins have not been pushed into the plastic, if they have you will need to pry them out. The next step would be measuring the pins with a multimeter in diode mode. Also there are two fetts near the battery connector not just one.

Cette réponse est-elle utile ?

Oui Non
Indice 1

1 commentaire:

i measured the pins and got the following readings: GND for GND and 418 for the 2 big pads on the other side as well as 689 for the data pins. Ill post in another comment a picture of the connector

par

Ajouter un commentaire

Options

Hi Benjemiah,

The error code refers to Temperature monitoring chip on the motherboard stopped working due to no feedback from the temperature sensor it has gone to fail safe mode (restart for every 3 mins)

Cette réponse est-elle utile ?

Oui Non
Indice 0

1 commentaire:

So it is not a Battery SWI Problem? How can it be fixed?

par

Ajouter un commentaire

Options

See this youtube link: https://www.youtube.com/watch?v=GSH2Y-Sp...

This will show in detail the circuit board issue

This is reference to the Panic restart every three minutes with reference to Mic1 not being found

Cette réponse est-elle utile ?

Oui Non
Indice 0
Ajouter un commentaire

Ajouter une réponse

benjemiah sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 4

30 derniers jours : 15

Total : 349