Just replaced the screen assembly on my iPhone XS. Worked fine to start, but then after about an hour it was continuously rebooting, showing 1% battery and acting very sluggish. Now it’s not turning on at all, even when put on the charger and there is a warm spot on the back near the camera (thinking it somehow shorted). Any advice?
Cette question est-elle utile ?
Rep: 58,5k
124
44
90
Hi Drew,
Well dang, I hate it when a repair I thought went well turns out to have problems.
First thing I'd do personally is to back out the repair and see if the phone goes back to its normal behavior. Yeah, that means taking off that brand new screen and putting the old broken one back on, but that will tell you whether the problem is with the phone itself or just with the new screen. From there we can figure out what the next step should be based on what you find.
Cette réponse est-elle utile ?
Yeah took it back off, reseated all the connectors, etc. Logic board is still warm even after being “off” for about an hour so I’m afraid she’s toast now. Unfortunately the OEM screen is no longer an option to put back on courtesy of a little curiosity :/
Dernières 24 heures : 0
7 derniers jours : 0
30 derniers jours : 2
Total : 29
