Rep: 149
5
2
Hi everybody ! As my title say new day new problem =)
New macBook pro and the problem after do a desoxydize ( don't know if it's the good words in english sorry ) so everything work except the touchpad i show you a picture for you so perhaps you can help me! the CLICK work well but when you want to move the "mouse" it's impossible ! THX for your help
Cette question est-elle utile ?
Rep: 26,3k
152
71
50
As lemerise mentioned you have problems with the 2 pins on the bottom left of the socket/connector/header. I will elaborate a little further on the matter. The pin on the end is missing. The next one in isn't soldered to the pad on the board. The socket needs replaced or repaired. It will take someone with above average soldering skills and good optics to replace the socket/header. Repairing the socket/header, judging from the provided pictures, could be more difficult than replacing it. Since this has experienced liquid damage, it is uncertain that either will fix the problem. There could be more problems with components on the board or in the sub-layers of the board. Finding a replacement socket/header should be something that can be accomplished. The majority of the computer/laptop sockets/headers are manufactured by Foxconn, including the ones on Apple products, and are available through a number of sources. You may be better off using an external USB mouse.
Cette réponse est-elle utile ?
Rep: 685,3k
3,4k
1,1k
2,6k
Just the trackpad can be replaced. It's Apple part number 922-9063
Cette réponse est-elle utile ?
Personally I had a problem with my trackpad and later found out that directly underneath is my batter. Well my battery was swelling which made it difficult to click down on the pad.
Cette réponse est-elle utile ?
Dernières 24 heures : 0
7 derniers jours : 0
30 derniers jours : 0
Total : 4,774
7 commentaires
Please give us the last three figures of your serial number so we know exactly which MBP you have.
par mayer
MacBook Pro 13.3"
Processor:2.26GHz Core 2 Duo (P7550 or P8400)
Serial #:W89262LZ66H
Model #:A1278
par VicenzoReturn
The two pins (bottom left of the connector) seems to have a problem. What do you mean by "deoxidize" ? Did you work on this connector ?
par lemerise
i use a product to clean the motherboard when she have take a swim!
par VicenzoReturn
anyone to help me plz ?
par VicenzoReturn
Voir 2 commentaires en plus