Aller au contenu principal

Apple Watch Series 2, annoncée le 7 septembre 2016 et commercialisée le 16 septembre 2016.

132 questions Voir tout

Snowy/fuzzy screen after ifixit battery replacement

Replaced the battery with ifixit battery kit. I was extra careful throughout the entire repair with absolutely no noticeable damage to anything internal. When the watch gets powered on it shows a snowy/fuzzy picture. Watch still works and seems like touch works. Any answers as to what could be the issue?

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Indice 0
Ajouter un commentaire

2 Réponses

Did you use a solvent trying to take the display off? I’m suspecting that it got between the crystal and the display fogging it

If the display is noisy (snow) that is a bad cable connection

Post a picture so we can get a better idea what you are facing.

Cette réponse est-elle utile ?

Indice 1

1 commentaire:

I didn't use any solvents. I used ifixit's iopener to open the watch. I'll have to try to check the cables but nothing looks damaged from what I can see. I unfortunately can not take any pictures for a while due to not being around the watch. Thanks for the advice.

par

Ajouter un commentaire
Réponse la plus utile

Double check all connections are fully seated. Even a mm out can cause issues.

Cette réponse est-elle utile ?

Indice 1

2 commentaires:

I checked them a few times, feels like they were seated in all the way, I'll have to try again some more. I guess. Thanks

par

@malston make sure the contacts on the ribbons are clean as they're obviously making contact as you have an image. Is there any chance you might of pulled one of the ribbons?

par

Ajouter un commentaire

Ajouter une réponse

Marc alston sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 2

Total : 66