Aller au contenu principal

4ème génération de l'Apple iPhone. La réparation est relativement simple, mais la vitre avant et le LCD doivent être remplacés ensemble. GSM / capacité de 8, 16 ou 32 Go / Modèle A1332 / noir et blanc.

2375 questions Voir tout

Change 3GS backlight coil to iPhone4?

My question is can i use an iphone 3gs Backlight IC not the coil... on a iphone 4?

Would it function the same if i mount it properly, the 3GS backlight IC is slightly larger than iphone

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Indice 0
Ajouter un commentaire

3 Réponses

Solution retenue

The iphone 4 uses a PH-AS-IP-00001 and the 3GS a IC 109B. They are two different beasts, and as you already mentioned different dimensions. I am all for fixing things, but in this case I would invest $10 and get the proper IC and coil and not risking a destroyed logic board. Just my 2 cents, good luck.

Cette réponse est-elle utile ?

Indice 3
Ajouter un commentaire

The screen is very different more pixels to push.so i would think that it would be different on the inside.I have the same problem but it is just a generation jumped.I have a buddy with a oscilloscope and will be checking that asap.I could post a picture to see if they match with what you or someone else reports.

Cette réponse est-elle utile ?

Indice 0
Ajouter un commentaire

nope they are very different chips with different pin outs

just get the right IC

fyi this is how you do the soldering when you get the ic and coil parts

repair video update

okay this is a soldering repair video on iphone 4S backlight coil

the whole soldering process is the same for iphone 4

http://www.youtube.com/watch?v=Bsk6rg0KX...

Cette réponse est-elle utile ?

Indice 0
Ajouter un commentaire

Ajouter une réponse

Joe sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 859