Aller au contenu principal

Mis sur le marché le 21 septembre 2018. Modèles A1920, A2097, A2098, A2100. Disponible avec GSM ou CDMA / eSIM ou dual-sim / 64, 256 ou 512 Go / Argent, Or ou Gris sidéral. (Se prononce "iPhone 10 S".)

398 questions Voir tout

My screen isn't responding to touch after water was splashed on it why

My baby splashed water on my phone surface and I quickly dried it and checked if water entered the speakers and charging port and water didn't enter it. My screen guard was broken so a little water was in between the screen and screen guard so I removed the screen guard and cleaned the screen. My phone was working fine for 30 minutes then the screen stopped responding. Everything is working, the screen is fine but isn't responding to touch. Please how can I fix this?

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Indice 1

1 commentaire:

The only diy repair without repairing anything is to remove the back cover and separate the battery from phone and lay them out on a dish placed on a gas stove having a pilot light, gas oven with pilot light warming the oven, on top of a hot water boiler, sunny window or outside sunny spot; all gently warming the phone to slowly evaporate any remaining moisture. Allow several hours or more for warmth to evaporate tiny amounts of moisture not removed by hand, Q-tip, isopropyl alcohol or tissue. 24 hours of gentle heat should be enough, then reassemble and hope for the best.

par

Ajouter un commentaire

1 Réponse

It is possible that when the water splashed the screen it probably broke the digitizer which is what registers when and where you touch the screen. So you probably need to replace the screen.

Cette réponse est-elle utile ?

Indice 0
Ajouter un commentaire

Ajouter une réponse

Preciousjames sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 9

Total : 24