Réparez vos affaires Communauté Boutique

Question close

Options

Flashing Apple Icon after Installing New LCD Screen

I just installed a new LCD screen on my ipod touch 2g. Once I plugged it in my computer, I get the flashing apple icon. When I unplug it, it seems like the ipod has died. I have read many places that restoring it should fix the issue, but my sleep button hasn't functioned properly for some time, sometimes I can get it to work and sometimes I cant. Also ever since I installed the new LCD screen, my computer or itunes doesn't recognize the ipod when I plug it in. I am getting frustrated.

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 0
Ajouter un commentaire

3 Réponses

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s

Options

Try taking it apart again, and with the new display connected, disconnect and reconnect the battery.

Cette réponse est-elle utile ?

Oui Non
Indice 0

2 commentaires:

Thanks for that info. I will give it a shot and see what happens.

par

I assume you need melt the solder or does it unplug where the ribbon meets the battery?

par

Ajouter un commentaire

Options

You get the flashing apple icon when the battery is really low....Charge the battery and take a look after 1-2 hours.

You should fix your sleep button, unscrew it, there is a little metal pad under the sleep button, just replace it in the center with glue and it's done.

It hard fix an ipod without sleep and home button.

Cette réponse est-elle utile ?

Oui Non
Indice 0

1 commentaire:

charging the battery for two didn't do anything. I just received a new digitizer with the new home button and replaced my sleep and volume buttons also, but the flashing began when i put in the new LCD and then the other part where installed a couple days later. i am stumped at this point.

par

Ajouter un commentaire

Options

For disconnecting the battery, you have to desolder the connection on the logic board. Take care, don<t remove the 3 solder pads. Use hot solder iron, lot of flux and solder wick.

http://www.youtube.com/watch?v=LrFaXblPn...

If you bought a broken ipod, take a look if you have a missing pad. That can cause the problem.

Take a look on youtube, how desolder an ipod battery.

Cette réponse est-elle utile ?

Oui Non
Indice 0

1 commentaire:

Thanks I will give that check out the video. The ipod is mine. Not realizing it fell on the floor, I accidentally stepped on it while wearing boots and broke the digitizer and messed up the lcd screen.

par

Ajouter un commentaire
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 1,117