Réparez vos affaires Communauté Boutique
Pour réparer ensemble - Je crée un compte

Tutoriels de réparations et de démontage pour l’iPad 7e génération.

20 questions Voir tout | 23 pièces Boutique

Options

iPad 7 only pulling 0.48 AMPS after a lot of repairs

So the iPad came in a while ago only pulling 0.48amps.

The charging port and Power IC were changed, and the iPad was working perfectly too, pulling 1.5 amps - 2amps. Then 3 days after the customer picked it up it was back at 0.48amps.

Weird .... Anyway a new battery this time fixed it. Pulling amazing amps and everything. The customer picks it up but comes back 2 days later, and the same thing happens, back to 0.48 amps.

Is it just me or is the customer killing this iPad?

Or am I missing something completely?

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 0
Ajouter un commentaire

1 Réponse

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s
Solution retenue

Options

Hi,

iPad 7's are known to have CPU problems. This is a manufacturing defect in which the solder balls of the CPU dry out, resulting in dead iPads. Most likely, it started working after heat was applied when PMIC was replaced. Try heating the CPU at 180°c for 1 minute and test it out.

The only solution is to recall the CPU, which is a highly technical and time-consuming job.

BR

Francis

CelMetro

Cette réponse est-elle utile ?

Oui Non
Indice 0
Ajouter un commentaire

Ajouter une réponse

Casphone sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 5

30 derniers jours : 23

Total : 230