Aller au contenu principal

Modèle n° A1367 / 8,16,32 ou 64 GB de capacité

913 questions Voir tout

Two rows of touch do not work after repairing Home button

Hi,

The home button on my iPod touch 4g was stuck down so I opened the case to fix it. Now it works fine but when I turned the iPod back on, I realized that one row of touch did not work. It then expended to the last row as well after I tried to reseat the LCD cable. Then I disassembled the iPod some more to disconnect the digitizer completely and reconnect it. Same thing. The two last rows don't work. The digitizer cable does not seem damaged and I was VERY cautious during the whole process. Is it possible that I broke the digitizer itself? Is there something else I should try? If I order a new screen will it fix the problem?

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Indice -1
2 commentaires

I booted the iPod in recovery mode. I'm performing a full reset at the moment and if it doesn't work, I buy a new LCD+digitizer hoping that it will work...

par

Same problem after full reset. I bought a new screen on Amazon. We'll see how it turns out...

par

Ajouter un commentaire

2 Réponses

Solution retenue

Buying new digitizer could fix the issue.

Cette réponse est-elle utile ?

Indice 2
Ajouter un commentaire

Try to clean contacts of digitizer with alcohol, I did it with my iPad and it helped)) but be careful

Cette réponse est-elle utile ?

Indice 0
Ajouter un commentaire

Ajouter une réponse

Matthieu Pepin sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 434