Aller au contenu principal

GPU reballed, still black Screen

Hello, first question from me over here ;-)

I have an old A1150 MacBook Pro, it came to me with a black screen error. I reballed a pre-testetd GPU and fixed it.

It starts, booting sound and dvd drive noises are here. But still black screen. The display and the inverter seems ok, tested on another A1150.

The pre-owner layed into an oven I think, the dvi port was not sitting correctly on its solder joints, so I removed it to be sure that there´s no short circuits on it.

Any suggestions please to fix that logicboard ? Or should I trash-bay it ? ;-)

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Indice -1
Ajouter un commentaire

1 Réponse

Solution retenue

First off, you have to understand that reballing isnt a permanent solution and it is something that if it doesn't work the first time, you really don't try it again. Reballing is also something that isn't a gaurenteed fix. I have done reballing in the past and the method of baking the board in an oven can actually damage the board compared to a professional reballing. When you said that the DVI port was slightly coming of there could be many other small components that could have had parts of them melted. In my opinion this is a hopeless board and is way beyond repair. I would try and buy another logic board if you really want it fixed. If you don't want to buy a new logic board the computer could make decent mony on eBay as parts or just as a whole.

Hope this helps

Cette réponse est-elle utile ?

Indice 1
Ajouter un commentaire

Ajouter une réponse

Stoffelgangster sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 1,351