Aller au contenu principal

Version CDMA de la quatrième génération d'iPhone. La réparation est simple, mais la vitre avant et le LCD ne peuvent pas être remplacés séparément. 16 ou 32 Go / Modèle A1349 / compatibilité CDMA.

Questions au sujet de 417 Voir tout

How to fix a sunk in power button

So, my iPhone4 was perfectly fine until a couple weeks ago. I took it out of my pocket and I discovered that the power button had "sunk" in. It still functions; however, there is no click or resistance when I press it down. I have to push a lot harder in order for it to properly work. I have take then entire phone apart in order to attempt a fix, but I cant figure it out. The power sensor cable seemed perfectly fine (the yellow 'nub' was still intact). Any suggestions on what I can do to restore the original function and regain the clicking?

Any help would be greatly appreciated.

also, theres no water damage nor has the phone been dropped.

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Indice 2
Ajouter un commentaire

1 solution

Réponse la plus utile

Unfortunately that is a common problem on the iphone 4.

The problem is that originally there is a small black 'dot of plastic' on top of the switch (on the flex) which activates the switch when you press.

Most likely this black dot has disappeared from your switch. The best way to solve this is to replace the power and sensor flex assembly:

[produit lié absent ou désactivé : IF189-004-1]

Cette réponse a-t-elle été utile ?

Indice 3
Ajouter un commentaire

Ajouter une réponse

Christian sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 10

Total : 23,259