Réparez vos affaires Communauté Boutique

Third generation of iPad, featuring 4G capabilities, released on March 16, 2012. Model number A1430. Repairs require heat and careful prying.

106 questions Voir tout

Options

Which parts are required to complete a screen replacement

I have replaced the digitizer on a few iPad 2nd gens. I typically replace the middle frame bezel every time I replace the digitizer. I haven't been able to find replacement middle frame bezels for the new iPad. I was wondering if the iPad 2 bezel would fit, since the old one typically gets some minor damage during removal of the digitizer. Also, is the adhesive similar between the generations?

-Thanks,

jwesleym

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice -1
Ajouter un commentaire

3 Réponses

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s
Solution retenue

Options

I just did an iPad 3 Screen replacement,

For the most part, the replacement is about the same - and most of the adhesive is the same too (there are a couple of bits different, but nothing that should affect anything). The part I ordered came with the plastic bezel, I do not know how similar it is to the iPad 2 as I have never replaced the bezel with the screen in the iPad 2.

-David

Cette réponse est-elle utile ?

Oui Non
Indice 1

1 commentaire:

How much does the screen cost?

par

Ajouter un commentaire

Options

I would also recommend foam tape gasket around the LCD. It gets torn when opened. Dust will enter the screen

Cette réponse est-elle utile ?

Oui Non
Indice 0
Ajouter un commentaire

Options

I use the old bezel too (only if it is in Good condition).

And you, you too or not?

Thanks, Mauro Ju Macniaco

Cette réponse est-elle utile ?

Oui Non
Indice 0
Ajouter un commentaire

Ajouter une réponse

jwesleym sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 3,106