Modèle A1278 mi-2010 / processeur core 2 Duo à 2.4 ou 2.66 GHz

Questions au sujet de 814 Voir tout

Battery issue after optibay HDD installation

After taking out the superdrive and putting in an optibay that holds an HDD, my battery isn't charging. The battery is "Normal" and the charger is fine, but the battery will not charge. It says "Not charging". Any help is greatly appreciated.

Une réponse ! View the answer J'ai le même problème

Cette question est-elle utile ?

Score 0
Ajouter un commentaire

%Livraison gratuite pour toute commande supérieure à 100,00 $US ou contenant un Pro Tech Toolkit !

Parcourez notre boutique

1 réponse

Solution retenue

Try reconnecting the battery connector to the logic board. If that doesn't work, try resetting the system management controller (SMC) with the instructions from

1.) Shut down the computer.

2.) Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.

3.) On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.

4.) Release all the keys and the power button at the same time.

5.) Press the power button to turn on the computer.

Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.

Good luck!

Cette réponse est utile ?

Score 2
Ajouter un commentaire

Ajoutez une réponse

Bud sera éternellement reconnaissant.
Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 947