Réparez vos affaires Communauté Boutique

Modèle n° A1367 / 8,16,32 ou 64 GB de capacité

914 questions Voir tout
Question close

Options

Anyone else with Front Glass / LCD Panel replacement quality issues?

Hi,

I had replaced several front glass / LCD panels for the iPod Touch 4.

And i encountered this particular issue with the replacements. (I had bought them from different suppliers, eBay mostly.)

And when replacing the LCD screen + glass. And closing the device properly im getting this weird "smudge" when i press the screen. Not so hard but even with the small force applied im getting this "ghost / smudge" that clears itself after a few seconds. (Imagine when pressing a calculator display and changes color.)

Any one else having this issue?

If so, any solution?

Thanks!!

:)

Here are some pictures

Block Image

Block Image

Block Image

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 0
Ajouter un commentaire

1 Réponse

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s
Solution retenue

Options

That's more likely due to slight misalignment (which may be due to poor quality --> poor fitting parts.) It's just the LCD being pushed against the midframe.

It could be poor quality parts. I've also found if the iPod's bezel has any dents in it this can cause the display to be out of place very slightly causing similar issues.

Also make sure the new glue stickers you apply are in the correct position and not overlapping the frame.

Cette réponse est-elle utile ?

Oui Non
Indice 0

1 commentaire:

Thanks ill give it a try all advices and let you know

par

Ajouter un commentaire
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 877