Liquid damage on M4 Pro and it seems an IC chip needs to be replaced
Hi all, I would like some hints on what could be done next. The battery was already low, so when I had a spill, immediately tried to dry it off, managed to "save the laptop" (when we turned it on, seems to be intact but as soon as we tried to charge it it would either reboot or just wouldn't power) — however as soon as we dried it for about 3-4 days, and tried to plug the MagSafe, it won't charge.
Took it to the third party repair and they mentioned there was a short, most likely located in the logicboard. When we checked the voltage, there is 5v on the USB-C ports, meaning it should still be fine....?
There's no schematics released yet. My only assumption is that the IC chip has to be replaced, but their concern is getting the right IC chip.
I'm no technician and the third party has way more expereience in electronics and micro soldering component parts. But I am losing my marbles since I just got this thing. Currently still under progress (been about a day ish).
Cette question est-elle utile ?
There are a few different models for the 14" M4
A3112 10 CPU/10 GPU 14" (820-03129)
A3401 12 CPU/16 GPU 14" (820-03400)
A3401 14 CPU/20 GPU 14" (820-03400)
A3185 14 CPU/32 GPU 14"
A3403 14 CPU/20 GPU 16"
Which model do you have?
I also cannot find any schematics for any of these models as yet....
par livfe
@livfe mine is the A3401 model
par crowbell
@crowbell The board number for this one is (820-03400) it might help in a search for the schematics.
par livfe
@livfe hasn't been around as of now. i'm just thinking if this is not fixable by third party, I might as well try submit it to the official services
par crowbell
@crowbell Never give up, pity the schematics isn't available as yet so someone can have a deep inspection before submitting it to the costly apple services.... good luck!
par livfe
Afficher 1 commentaire en plus