<?xml version="1.0" encoding="utf-8"?>
<rss version="2.0"
           xmlns:content="http://purl.org/rss/1.0/modules/content/"
           xmlns:wfw="http://wellformedweb.org/CommentAPI/"
          >
<channel>
<title><![CDATA[iFixit - Answers With Device &quot;Whirlpool Washing Machine&quot;]]></title>
<link>https://fr.ifixit.com/R%C3%A9ponses/Device/Whirlpool_Washing_Machine?rss=yes</link>
<description><![CDATA[Top Questions according to your query. Only showing &quot;Whirlpool Washing Machine&quot; questions.]]></description>
<language>en-US</language>
<pubDate>Tue, 18 Aug 2026 15:33:22 -0700</pubDate>
<item>
<title><![CDATA[Whirlpool Washing Machine: pourquoi la machine à laver lg wd 12270fd n essore plus]]></title>
<description><![CDATA[<p>Bonjour, ma machine à laver lg wd12270fd n essore pas, les autres modes fonctionnent sans problème,</p>

<p>quand essore  les tourne à gauche et à droite lentement,</p>

<p>quand j'active le mode diagnostic je peut  effectue tous les tests sans problèmes</p>

<p>J'ai changé le tachymètre sans changement</p>

<p>J'ai changé la sécurité de la porte sans changement</p>

<p>J'ai nettoyé le filtre</p>

<p>la lave linge est en bonne etat</p>

<p>Je ne sais pas quoi faire ensuite</p>

<p>quelqu'un peut m'aider s'il vous plait</p>

<p>merci</p>

<p>⟐ Answered février 27, 2023 at 10:21 UTC−7</p>]]></description>
<link>https://fr.ifixit.com/R%C3%A9ponses/Afficher/558065/pourquoi+la+machine+%C3%A0+laver+lg+wd+12270fd+n+essore+plus</link>
<guid isPermaLink="false" >https://fr.ifixit.com/R%C3%A9ponses/View/558065</guid>
<pubDate>Mon, 27 Feb 2023 10:21:05 -0700</pubDate>
</item>
<item>
<title><![CDATA[Whirlpool Washing Machine: trot de bruit à l'essorage]]></title>
<description><![CDATA[<p>pendant l'essorage fait beaucoup de bruit</p>

<p>⟐ Answered janvier 18, 2026 at 11:28 UTC−7</p>]]></description>
<link>https://fr.ifixit.com/R%C3%A9ponses/Afficher/935866/trot+de+bruit+%C3%A0+l&#039;essorage</link>
<guid isPermaLink="false" >https://fr.ifixit.com/R%C3%A9ponses/View/935866</guid>
<pubDate>Sun, 18 Jan 2026 11:28:33 -0700</pubDate>
</item>
<item>
<title><![CDATA[Whirlpool Thin Twin washer dryer combo.: lave/seche linge fait sauter le compteur au branchement]]></title>
<description><![CDATA[<p>Bonjour,</p>

<p>mon lave linge de marque Whirlpool, c'est arrêté brusquement pendant un cycle, et fait disjoncter le compteur électrique. Depuis dès que je branche l'appareil le courant se coupe.</p>

<p>Je ne peux pas vérifier les circuits qui cause problème car je ne peux alimenter le lave linge sans faire sauter le compteur.</p>

<p>Comment puis je réparer mon appareil?</p>

<p>⟐ Answered juin 16, 2025 at 6:36 UTC−7</p>]]></description>
<link>https://fr.ifixit.com/R%C3%A9ponses/Afficher/903817/lave-seche+linge+fait+sauter+le+compteur+au+branchement</link>
<guid isPermaLink="false" >https://fr.ifixit.com/R%C3%A9ponses/View/903817</guid>
<pubDate>Mon, 16 Jun 2025 06:36:05 -0700</pubDate>
</item>
<item>
<title><![CDATA[Whirlpool Washing Machine: Whirlpool sensing the difference 8kg ZEN]]></title>
<description><![CDATA[<p>La porte de la machine ne ouvre pas. Et la machine ne marche pas</p>]]></description>
<link>https://fr.ifixit.com/R%C3%A9ponses/Afficher/887971/Whirlpool+sensing+the+difference+8kg+ZEN</link>
<guid isPermaLink="false" >https://fr.ifixit.com/R%C3%A9ponses/View/887971</guid>
<pubDate>Sat, 15 Feb 2025 13:33:23 -0700</pubDate>
</item>
<item>
<title><![CDATA[Whirlpool Washing Machine: Pourquoi la machine arrête son programme tout seul en signalant]]></title>
<description><![CDATA[<p>Pourquoi ma machine arrête son programme tout seul en signalant</p>]]></description>
<link>https://fr.ifixit.com/R%C3%A9ponses/Afficher/881279/Pourquoi+la+machine+arr%C3%AAte+son+programme+tout+seul+en+signalant</link>
<guid isPermaLink="false" >https://fr.ifixit.com/R%C3%A9ponses/View/881279</guid>
<pubDate>Mon, 23 Dec 2024 03:26:49 -0700</pubDate>
</item>
<item>
<title><![CDATA[Maytag or Whirlpool Centennial washer: Sèche linge Whirlpool sens]]></title>
<description><![CDATA[<p>Bonjour sèche linge Whirlpool sens défaut F06 voyant filtre allumé merci</p>

<p>⟐ Commented novembre 29, 2022 at 9:28 UTC−7</p>]]></description>
<link>https://fr.ifixit.com/R%C3%A9ponses/Afficher/757223/S%C3%A8che+linge+Whirlpool+sens</link>
<guid isPermaLink="false" >https://fr.ifixit.com/R%C3%A9ponses/View/757223</guid>
<pubDate>Tue, 29 Nov 2022 09:28:47 -0700</pubDate>
</item>
<item>
<title><![CDATA[Whirlpool Washing Machine: How can I address the F1 error code?]]></title>
<description><![CDATA[<p>My Cabrio washing machine constantly stops during the wash cycle and shows an F1 error code. I hit pause and start at least 50 times over two hours to complete my wash. Is there a part I can replace so that my wash cycle operates properly?</p>

<p>⟐ Commented mars 17, 2024 at 6:06 UTC−7</p>]]></description>
<link>https://fr.ifixit.com/R%C3%A9ponses/Afficher/193013/How+can+I+address+the+F1+error+code</link>
<guid isPermaLink="false" >https://fr.ifixit.com/R%C3%A9ponses/View/193013</guid>
<pubDate>Sun, 17 Mar 2024 06:06:11 -0700</pubDate>
</item>
<item>
<title><![CDATA[Whirlpool Washing Machine: Washer fills with water, doesn't agitate but will spin out water?]]></title>
<description><![CDATA[<p>Whirlpool Ultimate Care 2 Model</p>

<p>After the washer fills with water the washer begins to hums loudly. The washer then begins to smell as if something is getting hot. The only function that really works after this point is if the washer is turned to the spin out cycle. The washer can spin out all of the water.</p>

<p>What is wrong and can I fix it? Thank you in advance for any help.</p>

<p>⟐ Commented juillet 27, 2026 at 1:40 UTC−7</p>]]></description>
<link>https://fr.ifixit.com/R%C3%A9ponses/Afficher/154421/Washer+fills+with+water,+doesn&#039;t+agitate+but+will+spin+out+water</link>
<guid isPermaLink="false" >https://fr.ifixit.com/R%C3%A9ponses/View/154421</guid>
<pubDate>Mon, 27 Jul 2026 01:40:45 -0700</pubDate>
</item>
<item>
<title><![CDATA[Whirlpool Washing Machine: whirpool top loader won't agitate or spin, does fill and drain]]></title>
<description><![CDATA[<p>Got an older Whirpool top loading washer (direct drive).  Fills and drains as expected, but won't agitate or spin.  The timer goes through the cycles as expected, and I can hear what sounds like a motor turning in there, but it doesn't translate into agitation or spin.</p>

<p>I don't think it's the lid switch as it does make the expected click, and it IIRC this washer will still agitate when the lid is open.</p>

<p>The other symptom is that I cannot turn the agitator with my hand.  Or I can only turn it a little bit.  Usually with the washer off I can turn it pretty well with just hand strength.  Does this indicate a broken coupler or clutch?</p>

<p>Thanks for your help!</p>

<p>⟐ Answered décembre 09, 2025 at 7:49 UTC−7</p>]]></description>
<link>https://fr.ifixit.com/R%C3%A9ponses/Afficher/146662/whirpool+top+loader+won&#039;t+agitate+or+spin,+does+fill+and+drain</link>
<guid isPermaLink="false" >https://fr.ifixit.com/R%C3%A9ponses/View/146662</guid>
<pubDate>Tue, 09 Dec 2025 07:49:33 -0700</pubDate>
</item>
<item>
<title><![CDATA[Whirlpool Washing Machine: washer has had the error codes F03 and E01.]]></title>
<description><![CDATA[<p>My whirlpool duet washer has had the error codes F03 and E01. The pressure switch has been replaced 3x’s with no results. Still get that error.</p>

<p>I pointed out that it may be an Air Dome Assembly per service bulletin for this model of washer with the model # WFW95HEDWO.  He, “The Tech” answer, even after I showed him the bulletin was “no I don’t think that the problem”.  How much is that part and how hard is it to replace?  Also, should I pursue this possible fix with Whirlpool?</p>

<p>Thank you,</p>

<p>Pat G.</p>

<p>⟐ Commented octobre 03, 2025 at 8:10 UTC−7</p>]]></description>
<link>https://fr.ifixit.com/R%C3%A9ponses/Afficher/621860/washer+has+had+the+error+codes+F03+and+E01.</link>
<guid isPermaLink="false" >https://fr.ifixit.com/R%C3%A9ponses/View/621860</guid>
<pubDate>Fri, 03 Oct 2025 08:10:01 -0700</pubDate>
</item>
<item>
<title><![CDATA[Whirlpool Washing Machine: Whirlpool Cabrio Series 5000 Washing Machine stopped spinning at all, stopped draining now too]]></title>
<description><![CDATA[<p>Why did my washer stop draining and spinning?  I tried clearing out the drain, checked, removed and cleaned the drain pump, ran a diaganostic and ran a recalibration.   I am thinking the control actuator or shifter arm is bad but the stupid thing is only a year old.</p>

<div class="clearer"></div><div class="headerContainer"><h2 id="Section_Update" class="header">Update</h2></div>

<p>It WAS the shift actuator.  There were apparently several service bulletins, changes to the part and improvements before they got this problem under control.  I got the newest part available and I'm up and running again today.</p>

<p>⟐ Commented mai 14, 2022 at 13:50 UTC−7</p>]]></description>
<link>https://fr.ifixit.com/R%C3%A9ponses/Afficher/81543/Whirlpool+Cabrio+Series+5000+Washing+Machine+stopped+spinning+at+all,+stopped+draining+now+too</link>
<guid isPermaLink="false" >https://fr.ifixit.com/R%C3%A9ponses/View/81543</guid>
<pubDate>Sat, 14 May 2022 13:50:57 -0700</pubDate>
</item>
<item>
<title><![CDATA[Whirlpool Washing Machine: Won't spin loud noise]]></title>
<description><![CDATA[<p>Machine makes a horrendous noise almost like an alarm when running. Fills and drains ok, doesn't spin/agitate.</p>

<p>⟐ Answer edited janvier 10, 2017 at 4:42 UTC−7</p>]]></description>
<link>https://fr.ifixit.com/R%C3%A9ponses/Afficher/143294/Won&#039;t+spin+loud+noise</link>
<guid isPermaLink="false" >https://fr.ifixit.com/R%C3%A9ponses/View/143294</guid>
<pubDate>Tue, 10 Jan 2017 04:42:49 -0700</pubDate>
</item>
<item>
<title><![CDATA[Whirlpool Washing Machine: How to fix error code F08 or FOB]]></title>
<description><![CDATA[<p>Washing machine starts up and after 2 seconds it stops and this code came up. Have to reset the washer cause the door locks. Ive tried various different loads and even a empty load but no luck.</p>

<p>⟐ Answered octobre 15, 2025 at 1:50 UTC−7</p>]]></description>
<link>https://fr.ifixit.com/R%C3%A9ponses/Afficher/388224/How+to+fix+error+code+F08+or+FOB</link>
<guid isPermaLink="false" >https://fr.ifixit.com/R%C3%A9ponses/View/388224</guid>
<pubDate>Wed, 15 Oct 2025 01:50:20 -0700</pubDate>
</item>
<item>
<title><![CDATA[Whirlpool Washing Machine: Why is my whirlpool cabrio washer leaking water on floor]]></title>
<description><![CDATA[<p>Why does my whirlpool Cabrio washer leak water on the floor during first fill</p>

<p>⟐ Answered octobre 15, 2025 at 1:46 UTC−7</p>]]></description>
<link>https://fr.ifixit.com/R%C3%A9ponses/Afficher/522204/Why+is+my+whirlpool+cabrio+washer+leaking+water+on+floor</link>
<guid isPermaLink="false" >https://fr.ifixit.com/R%C3%A9ponses/View/522204</guid>
<pubDate>Wed, 15 Oct 2025 01:46:58 -0700</pubDate>
</item>
<item>
<title><![CDATA[Whirlpool Washing Machine: Whirlpool lid lock bypass]]></title>
<description><![CDATA[<p>I have a Whirlpool wtw5000dw1  and I'm trying to bypass the lid lock by cutting the wires. They are res white and blue. Which two should I cut?</p>

<div class="clearer"></div><div class="headerContainer"><h3 id="Section_Update_06_29_Num_2019" class="header">Update (06/29/2019)</h3></div>

<p>*red, white, and blue</p>

<p>⟐ Commented juin 20, 2026 at 6:30 UTC−7</p>]]></description>
<link>https://fr.ifixit.com/R%C3%A9ponses/Afficher/575981/Whirlpool+lid+lock+bypass</link>
<guid isPermaLink="false" >https://fr.ifixit.com/R%C3%A9ponses/View/575981</guid>
<pubDate>Sat, 20 Jun 2026 06:30:10 -0700</pubDate>
</item>
<item>
<title><![CDATA[Whirlpool Washing Machine: Why I can't access diagnostic mode]]></title>
<description><![CDATA[<p>I installed a new control board and machine won't go into diagnostic mode. What is next step?</p>

<p>⟐ Commented novembre 17, 2024 at 11:27 UTC−7</p>]]></description>
<link>https://fr.ifixit.com/R%C3%A9ponses/Afficher/501093/Why+I+can&#039;t+access+diagnostic+mode</link>
<guid isPermaLink="false" >https://fr.ifixit.com/R%C3%A9ponses/View/501093</guid>
<pubDate>Sun, 17 Nov 2024 11:27:24 -0700</pubDate>
</item>
<item>
<title><![CDATA[Whirlpool Washing Machine: Why does my washing machine make noise when not in use?]]></title>
<description><![CDATA[<p>I woke up this morning to a strange noise coming from my laundry room. My washer seemed to be making a noise that sounded like it was slightly running (not agitating or filling with water, just kind of humming). The noise stopped when I unplugged it. But when I tried to turn it on to run a cycle, nothing happened. None of the lights turned on or anything at all. When I plug it back in, the sound starts again after about 5 to 10 seconds.</p>

<div class="clearer"></div><div class="headerContainer"><h3 id="Section_Update_10_28_Num_23" class="header">Update (10/28/23)</h3></div>

<p>The noise seems to be coming from the water drainage hose. It is like it's trying to empty water from the machine but it's not turned on.</p>

<p>⟐ Commented février 02, 2026 at 15:03 UTC−7</p>]]></description>
<link>https://fr.ifixit.com/R%C3%A9ponses/Afficher/821484/Why+does+my+washing+machine+make+noise+when+not+in+use</link>
<guid isPermaLink="false" >https://fr.ifixit.com/R%C3%A9ponses/View/821484</guid>
<pubDate>Mon, 02 Feb 2026 15:03:18 -0700</pubDate>
</item>
<item>
<title><![CDATA[Whirlpool Washing Machine: Whirlpool washer error F25]]></title>
<description><![CDATA[<p>Hi,</p>

<p>A 3-year old Whirlpool washing machine stopped working. At the very beginning of the cycle it turns the drum a tiny bit and stops with the Draining red light blinking. I read error code and got F25.</p>

<p>I did what was was recommended here for similar questions: took off the front, wiggled all connectors on the control panel and what I could reach by hand at the bottom. There is no corrosion, all clean and tight.</p>

<p>Under the drum, I found a plastic part that broke off, see pic attached. I can’t find where it belongs to. Can it cause the issue here?</p>

<p>Other suggestions?</p>

<p>Thank you</p>

<div class="imageBox imageBox_left"><img src="https://guide-images.cdn.ifixit.com/igi/iFvfyNIba24GCIC3.standard" width="169" height="225" class="hasMenu hasLarge" alt="Image" onclick="window.open(&quot;https:\/\/guide-images.cdn.ifixit.com\/igi\/iFvfyNIba24GCIC3.huge&quot;, '', 'width=900,height=1200')" /></div>

<div class="clearer"></div><div class="headerContainer"><h3 id="Section_Update_10_08_Num_2019" class="header">Update (10/08/2019)</h3></div>

<p>Model WFC7500VW 2</p>

<p>TYPE: 826-02</p>

<p>MOD</p>

<p>Thank you</p>

<p>⟐ Commented juillet 21, 2022 at 20:44 UTC−7</p>]]></description>
<link>https://fr.ifixit.com/R%C3%A9ponses/Afficher/595326/Whirlpool+washer+error+F25</link>
<guid isPermaLink="false" >https://fr.ifixit.com/R%C3%A9ponses/View/595326</guid>
<pubDate>Thu, 21 Jul 2022 20:44:55 -0700</pubDate>
</item>
<item>
<title><![CDATA[Whirlpool Washing Machine: Error code fo1 and e03]]></title>
<description><![CDATA[<p>What do these code mean an how do you fix them?  Also the door is locked and can not be opened.</p>

<p>⟐ Commented juillet 29, 2024 at 17:07 UTC−7</p>]]></description>
<link>https://fr.ifixit.com/R%C3%A9ponses/Afficher/526960/Error+code+fo1+and+e03</link>
<guid isPermaLink="false" >https://fr.ifixit.com/R%C3%A9ponses/View/526960</guid>
<pubDate>Mon, 29 Jul 2024 17:07:07 -0700</pubDate>
</item>
<item>
<title><![CDATA[Whirlpool Washing Machine: How to fix Whirlpool top load washer out of ballance problem]]></title>
<description><![CDATA[<p>Whirlpool /Maytag washer model MTW5840TW0 works great, except on the drain and spin cycle.  The drum starts to spin and the water drains.  Once all the water has drained the drum goes out of balance and hits the cabinet.  What could be the problem?  I’m thinking its the suspension springs, but just by visual inspection they are not broken or rusty.</p>

<p>⟐ Answered avril 17, 2021 at 12:06 UTC−7</p>]]></description>
<link>https://fr.ifixit.com/R%C3%A9ponses/Afficher/552745/How+to+fix+Whirlpool+top+load+washer+out+of+ballance+problem</link>
<guid isPermaLink="false" >https://fr.ifixit.com/R%C3%A9ponses/View/552745</guid>
<pubDate>Sat, 17 Apr 2021 12:06:11 -0700</pubDate>
</item>
</channel>
</rss>