Aller au contenu principal
Aide

Version actuelle par : Kris Rodriguez (détails du vote) ,

Titre:

Replacing HD Step 13 calls for Torx T6

Texte:

Following your instructions for the removal/replacement of the HD

[guide|548|page=2]

at Step 13 it indicates that there are 2 hex screws.  I have a Torx T6 driver but it just spins in those screws.

Any recommendations on how to get those screws out (and back in)?

Appareil:

PowerBook G4 Aluminum 12" 1-1.5 GHz

Statut:

-open
+closed

Réponse acceptée:

102896

Modifié par : oldturkey03 (détails du vote) ,

Titre:

Replacing HD Step 13 calls for Torx T6

Texte:

Following your instructions for the removal/replacement of the HD

[guide|548|page=2]

at Step 13 it indicates that there are 2 hex screws.  I have a Torx T6 driver but it just spins in those screws.

Any recommendations on how to get those screws out (and back in)?

Appareil:

PowerBook G4 Aluminum 12" 1-1.5 GHz

Statut:

open

Réponse acceptée:

+102896

Modifié par : Andrew Optimus Goldheart ,

Titre:

Replacing HD Step 13 calls for Torx T6

Texte:

Following your instructions for the removal/replacement of the HD

[guide|548|page=2]

at Step 13 it indicates that there are 2 hex screws.  I have a Torx T6 driver but it just spins in those screws.

Any recommendations on how to get those screws out (and back in)?

Appareil:

-PowerBook G4 Aluminum 12inch 1-1.5 GHz
+PowerBook G4 Aluminum 12" 1-1.5 GHz

Statut:

open

Contribution d'origine par : kah ,

Titre:

Replacing HD Step 13 calls for Torx T6

Texte:

Following your instructions for the removal/replacement of the HD

[guide|548|page=2]

at Step 13 it indicates that there are 2 hex screws.  I have a Torx T6 driver but it just spins in those screws.

Any recommendations on how to get those screws out (and back in)?

Appareil:

PowerBook G4 Aluminum 12inch 1-1.5 GHz

Statut:

open