Aller au contenu principal
Aide

Version actuelle par : oldturkey03 ,

Texte:

-Jack, there are 2 fuses that you want to look at one is in the fuse box on the driver side ( Fuse N - IPC HVAC Batt) and on the passenger side fuse panel (Fuse D- HVAC Blower) If both fuses are okay, there is a pretty good chance that it is the Blower Motor Control Processor. It's like a blower resistor, only smarter. Last issue could be the blower motor itself. Hope this helps, good luck.
+Jack, there are 2 fuses that you want to look at one is in the fuse box on the driver side ( Fuse N - IPC HVAC Batt) and on the passenger side fuse panel (Fuse D- HVAC Blower) If both fuses are okay, there is a pretty good chance that it is the Blower Motor Control Processor. It can stop functioning without burning the fuses. It's like a blower resistor, only smarter. Last issue could be the blower motor itself. Hope this helps, good luck.
[image|213700|align=left]
[image|213698|align=left]
[image|213699|align=left]

Statut:

open

Contribution d'origine par : oldturkey03 ,

Texte:

Jack, there are 2 fuses that you want to look at one is in the fuse box on the driver side ( Fuse N - IPC HVAC Batt) and on the passenger side fuse panel (Fuse D- HVAC Blower) If both fuses are okay, there is a pretty good chance that it is the Blower Motor Control Processor. It's like a blower resistor, only smarter. Last issue could be the blower motor itself. Hope this helps, good luck.

[image|213700|align=left]

[image|213698|align=left]

[image|213699|align=left]

Statut:

open