Aller au contenu principal
Aide

Message d'origine par : oldturkey03 ,

Texte:

Meghan Locke, when you say " tabs 1 and 2 fell off" I suppose you mean connector 1 and 2, #1 is for the LCD and #2 is for the touch screen. #7 is for the antenna. Now when you say you tried to solder but it would not stick, I assume you are talking about soldering the connector back to the logic board. Unless you have the right tools and the experience, this is a very difficult task. Sticking it on the board with tape is not going to accomplish this. It will not make any contact with the board. I strongly suggest that you find somebody locally who is equipped to solder those connectors back on the board. Hope this helps, good luck.

Statut:

open