Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Aide

Contribution d'origine par : Flower ,

Texte:

What else would be helpful is:

How to desolder the connectors from the digitizer of the homebutton cable and of the IC board/cable. eg.Temperature?!

How to solder the new connectors from the digitizer to the homebutton and the IC board/cable.

Temperature, solder piece, rosin, etc

I am pretty sure, you need to use the original IC that was build into the same original device otherwise funny things as jumping screens can happen even when soldering was well.

Flo

Statut:

open