Aller au contenu principal
Aide

Version actuelle par : davidmcjunkin ,

Titre:

Leftover part after Volume button cleaned

Texte:

I changed the battery and cleaned the Volume button on my iPhone 4S, everything seemed to go alright but a part fell out while I was tilting the phone to lift out one of the phillips head screws I had removed. I went through a lot of tear down pictures and looked for other posts that might have that part left over. It is a short piece of metal braided tubing that appears to have foam in the center. About 2mm long and about the same width when flattened.
 
[image|335813image|335813|align=left]
[image|335813image|335813|align=left]
 
I have it next to the pentalobe dock connector screw for scale. I thought the cell signal was gone at first because the phone showed "searching..." in the bar indicator, I switched in and out of Airplane mode and it seems to be fine now.

Appareil:

iPhone 4S

Statut:

open

Réponse acceptée:

165542

Modifié par : davidmcjunkin ,

Titre:

Leftover part after Volume button cleaned

Texte:

I changed the battery and cleaned the Volume button on my iPhone 4S, everything seemed to go alright but a part fell out while I was tilting the phone to lift out one of the phillips head screws I had removed. I went through a lot of tear down pictures and looked for other posts that might have that part left over. It is a short piece of metal braided tubing that appears to have foam in the center. About 2mm long and about the same width when flattened.

[image|335813]

I have it next to the pentalobe dock connector screw for scale.
I post a pic ifthought the cell signal was gone at first because the phone showed "searching..." in the bar indicator, I canswitched in and out of Airplane mode and it seems to be fine now.
I changed the battery and cleaned the Volume button on my iPhone 4S, everything seemed to go alright but a part fell out while I was tilting the phone to lift out one of the phillips head screws I had removed. I went through a lot of tear down pictures and looked for other posts that might have that part left over. It is a short piece of metal braided tubing that appears to have foam in the center. About 2mm long and about the same width when flattened.

[image|335813]

I have it next to the pentalobe dock connector screw for scale.
I post a pic ifthought the cell signal was gone at first because the phone showed "searching..." in the bar indicator, I canswitched in and out of Airplane mode and it seems to be fine now.

Appareil:

iPhone 4S

Statut:

open

Message d'origine par : davidmcjunkin ,

Titre:

Leftover part after Volume button cleaned

Texte:

I changed the battery and cleaned the Volume button on my iPhone 4S, everything seemed to go alright but a part fell out while I was tilting the phone to lift out one of the phillips head screws I had removed.  I went through a lot of tear down pictures and looked for other posts that might have that part left over.  It is a short piece of metal braided tubing that appears to have foam in the center.  About 2mm long and about the same width when flattened.  I post a pic if I can.

Appareil:

iPhone 4S

Statut:

open