Aller au contenu principal
Aide

Version actuelle par : Stephane Robert ,

Texte:

Did you use an Double sided tape to reassembly the new screen? If yes, you need to remove any older glue from the factory double sided tape. It happen sometimes.
- == Update ==
- You can fix this by using KAPTOP tape, to stick in place the ribbon cable with the socket. It will let in place. KAPTOP tape is available for many purpose and from every sizes. It used to shield, tape, and isolate electrical components. It also made in alumium in LCD to old in place ribbon cable from moving to the socket.
+== Update ==
+
+Well, you can glue it or let like this or change the screen.

Statut:

open

Modifié par : Stephane Robert ,

Texte:

Did you use an Double sided tape to reassembly the new screen? If yes, you need to remove any older glue from the factory double sided tape. It happen sometimes.
+ == Update ==
+
+ You can fix this by using KAPTOP tape, to stick in place the ribbon cable with the socket. It will let in place. KAPTOP tape is available for many purpose and from every sizes. It used to shield, tape, and isolate electrical components. It also made in alumium in LCD to old in place ribbon cable from moving to the socket.

Statut:

open

Contribution d'origine par : Stephane Robert ,

Texte:

Did you use an Double sided tape to reassembly the new screen? If yes, you need to remove any older glue from the factory double sided tape. It happen sometimes.

Statut:

open