Aller au contenu principal
Aide

Version actuelle par : Ulysses Ramirez ,

Texte:

-If the screen is blank and you cannot see the cursor on the screen, then your batteries may be too low. Check your batteries to make sure they are properly inserted and oriented as indicated in the battery cavity. If problem still persists, connect your AC adapter into your AlphaSmart Pro to power on the device. If the device turns on, your batteries are discharged and need replacing.
+* If the screen is blank and you cannot see the cursor on the screen, then your batteries may be too low. Check your batteries to make sure they are properly inserted and oriented as indicated in the battery cavity. If problem still persists, connect your AC adapter into your AlphaSmart Pro to power on the device. If the device turns on, your batteries are discharged and need replacing.
+
+* If the file appears empty, press the '''Clear File''' key to erase the file. This should clear space in your file and allow you to input text. Sometimes the file recovery command ('''Option-3€-R''') gets hit by mistake. This command recovers all data, including any unnecessary text in your memory and places the data at the end of your files. If you have any text you would like to save , go to the end of the file by pressing the '''End ''' key and erase any unwanted text by using the '''Delete '''key.

Statut:

open

Contribution d'origine par : Ulysses Ramirez ,

Texte:

If the screen is blank and you cannot see the cursor on the screen, then your batteries may be too low.  Check your batteries to make sure they are properly inserted and oriented as indicated in the battery cavity.  If problem still persists, connect your AC adapter into your AlphaSmart Pro to power on the device.  If the device turns on, your batteries are discharged and need replacing.

Statut:

open