Aller au contenu principal
Aide

Version actuelle par : Rany

Texte:

Hello world..!
i have finally a solution for the weak wifi signal for the iPad 2,
i have the same problems over and over again, after replacing the digitizer or lcd, you kill het wifi antenna (stupid construction)
this is only a ''solution'' for the people that taking there logic board out! so not the wifi/bluetooth card
first of all: your iPad 2 is a big aluminum antenna,
the problem is your logic board, when you want to get this out for replacing the antenna you need alot of force to get i out because it''s a little glued in the middle! (near by the battery connector)
what happens is that you bent your logic board a little bit!
there is a copper sticker on the backside of the logic board, that sticker is normally pushing again the aluminum body of you iPad 2 (grousing)
when you bent to much the sticker is not pushing against the frame anymore so you don't have circle or connection!
that is why you a have low or weak signal!
easy fix: just put something under the 2 srew's and metal plate that hold the logic board down (piece of paper or something else)
and add more force!
-thats it..! happy repairing and cheers jorisdevet@gmail.com maby for a small donation with paypal??? other questions? feel free to ask!
+thats it..! happy repairing and cheer.. other questions? feel free to ask!

Statut:

open

Contribution d'origine par : Joris

Texte:

Hello world..!

i have finally a solution for the weak wifi signal for the iPad 2,

i have the same problems over and over again, after replacing the digitizer or lcd, you kill het wifi antenna (stupid construction)

this is only a ''solution''  for the people that taking there logic board out! so not the wifi/bluetooth card

first of all: your iPad 2 is a big aluminum antenna,

the problem is your logic board, when you want to get this out for replacing the antenna you need alot of force to get i out because it''s a little glued in the middle! (near by the battery connector)

what happens is that you bent your logic board a little bit!

there is a copper sticker on the backside of the logic board, that sticker is normally pushing again the aluminum body of you iPad 2 (grousing)

when you bent to much the sticker is not pushing against the frame anymore so you don't have circle or connection!

that is why you a have low or weak signal!

easy fix: just put something under the 2 srew's and metal plate that hold the logic board down (piece of paper or something else)

and add more force!

thats it..! happy repairing and cheers jorisdevet@gmail.com maby for a small donation with paypal??? other questions? feel free to ask!

Statut:

open